

front panel

Rear panel
| RF characteristics | ||
| Frequency range | 87.50 to 108.00 MHz | |
| Frequency step |
10 kHz |
|
| RF input impedance |
50 Ω / 75 Ω |
|
| RF input connector |
BNC type |
|
| RF receiver | 1 | |
| I/O specifications | ||
| Metering (analog inputs | 12-bit -0 V/+50 V (4 ranges | |
| Status (digital inputs) |
5-25 VDC external or contact closure |
|
| Commands (relay outputs) | 1 A @ 50 VDC per relay | |
| FM Receiver | ||
| Selectivity: | ||
| Selectivity at ± 120 kHz |
> -50 dB | |
| Selectivity at ± 200 kHz |
> -55 dB |
|
| Selectivity at ± 300 kHz |
> -75 dB |
|
| Selectivity at ± 400 kHz |
> -90 dB (-80 dB typical) |
|
| Stereo decoder | ||
| L/R separation | 40 dB Typical | |
| De-emphasis |
adjustable 50-75 µs |
|
| 19 kHz suppression | > 50 dB with software filter, > 30 dB without |
|
| Distortion: | ||
| Deviation: 75 kHz Left or Right |
< 0.35 % 1 kHz (0.4 % typical) | |
| S/N 1 kHz mono (at 75 kHz deviation and 60 dBµV RF): | ||
| RMS | 68.5 dB (65 dB typical) | |
| QP CCIR | 50 dB stereo | |
| Acquisitions | ||
| Max. number of monitored stations | 10 | |
| RF level acquisition range |
20 dBµV to 95 dBµV |
|
| RF acquisition relative precision (1) |
~ 2 dB guaranteed (~ 0.5 dB typical) |
|
| AUDIO signal acquisition range |
- 40 dB to + 3dB |
|
| AF (2) acquisition precision |
~ 1 dB |
|
| MPX signal acquisition range |
4 kHz to 110 kHz |
|
| MPX (2) acquisition precision |
~ 2 kHz up to 90 kHz ~ 5 kHz from 90 to 110 kHz |
|
| PILOT 19 kHz sub-carrier acquisition range | 1 kHz to 15 kHz |
|
| PILOT 19 kHz (2) acquisition precision | ~ 1.5 kHz |
|
| RDS 57 kHz sub-carrier acquisition range | 1 kHz to 10 kHz |
|
| RDS 57 kHz (2) acquisition precision | ~ 1 kHz | |
| Communications |
||
| TCP-IP protocol with services | SNMP / FTP / NTP / XML-RPC | |
| Front panel terminal (default) |
IP configuration via DCE 9-pin male SUBD |
|
| Link type |
MODEM (RTC/GSM) / ETHERNET / RS232c |
|
| MODEM |
Optional, software configuration, approved by Audemat |
|
| Modem link type |
RS232c/USB (converter USB/SERIAL) |
|
| Communication speed |
1 200 - 115 200 bauds |
|
| Back panel connectors |
DTE 9-pin male SUBD / Type A USB |
|
| Ethernet Connector | 2 10/100M Base-T RJ45 ports | |
| Main characteristics | ||
| Main power supply | 110-230 V / 50-60 Hz | |
| Power consumption |
~ 38 VA |
|
| External dimensions (L x H x D) |
483 (19’’) x 42 (1U) x 340 mm |
|
| Weight | Around 5.75 kg (12 ½ lbs.) | |
Temperature
|
|
|
| Humidity | 10-95% non-condensing relative humidity | |
| (1): Depending on equipment calibration and surrounding temperature. (2): In relation to internal reference level. |
||


